Equipment Gallery
EDM
Fanuc wire EDM C400iB
Travels 15.7 x 11.8 x 10.2 +/- 30 degree taper, 4 axis Submerged cutting, automatic wire threading
Total: 1
Mitsubishi CNC Sinker EDM EX8 with C Axis
Travels 12x10x10, 3R spindle tooling, C axis, 50 AMP Power Supply
Total: 1
Methods Small Hole Bridge Type, High Speed EDM Drill
Travels 16x16x12 Digital Read Out
Total: 1
Grinding
Okamoto Automatic Surface Grinder DX1632
Servo Downfeed Digital Readouts Travels 16×32
Total: 1
Okamoto Automatic Surface Grinder DX820
Servo Downfeed Digital Readouts Travels 8×20
Total: 2
Okamoto 6/12 Surface Grinders
Digital Readouts Travels 6×12
Total: 1
Moore G-18 Jig Grinder
40,000 RPM Sprindle Travels 11×18 Moore Vertical/Horizontal Rotary Table
Total: 1
Shigiya Universal Cylindrical Grinder
O.D. and I.D. Cylindrical Grinder, 8×20 Capacity, Digital Readouts
Total: 1
Dedtru centerless grinder
Total: 1
Lathes
Daewoo Puma 240B CNC Lathe
8 inch chuck, 10×20 Capacity, Programmable Tail Stock, 6,000 RPM Spindle, 15 HP
Total: 1
Daewoo Lynx 200 CNC Lathe
5C Collet Systems, 2″ Bar Capacity, 6 1/2 x 12 Capacity, Programmable Tail Stock, 5,000 RPM Spindle
Total: 1
Wacheon Engine Lathe
17×60 Capacity Digital Readouts
Total: 1
Hardinge Super Precision HLVH Toolroom Lathe
Inch-Metric Threading Digital Readouts
Total: 1
Hardinge HC Chucker
Total: 1
Milling
Doosan DNM 5700S with 4th axis contouring rotary table , 15 HP
Travels 41.33 x 22.44 x 20.08 15,000 RPM 30 position tool change
Total: 1
Doosan DNM 5700 with 4th axis contouring rotary table , 15 HP
Travels 41.33 x 22.44 x 20.08 12,000 RPM 30 position tool change
Total: 1
Doosan DNM 400 Vertical Machining Center
30 Position ATC , 8,000 RPM Travels 30 x 17 x 20
Total: 1
Daewoo DMV 5025 Vertical Machining Center
Travels 51×25.5×24.6, 30 Position ATC, 6,000 RPM Spindle, 30 HP
Total: 1
Makino RMC55 Tool Room Mill
Travels 22 x 12.5 x 14 4,500 RPM Spindle , 5 HP
Total: 1
HAAS Mini Mill Vertical Machining Center
Travels 20x14x10, 10 Position ATC, 6,000 RPM Spindle, 3 HP
Total: 1
OKK 3MPH Bed Mills Vertical and Horizontal
15×65 Table, Universal angle head, Digital Read Outs, 10 HP
Total: 2
Bridgeport Milling Machines
9×48 Tables, Variable Speed Spindles, Power Feeds, Digital Read Outs
Total: 4
Inspection Equipment
Trimos motorized height gage
Trimos Vectra motorized height gage, .00002 (twenty millionths) resolution. Ability to sweep bores and give diameter and centerline, slot width, multiple steps.
Total: 1
Fowler Z-Cal Sylvac Motorized Height Gauges
10 Gram, 2mm Ruby Touch Probes .00005 Resolution
Total: 3
Brown and Sharpe Intrimics
.0001 Resolution .600 to 2.400 Capacity with Calibrated Ring Standards
Total: 6
Sunnen Dial Bore Gauges
With Setting Micrometer Fixtures and Calibrator Ring Standards .060 to 6.000 Capacity with .0001 Resolution
Total: 3
0-6″ Micrometer Sets
Total: 2
Set of M+ Gauge Pins from .011 to 1.000 in .001 Increments
Total: 1
Master Set of Mitutoyo Gauge JO Blocks
Total: 1
Deltronic 14 Inch Comparator
20:1 and 50:1 Lenses Digital Readout Geometric Gauging package
Total: 1
Starrett Rockwell Harness Tester
Total: 1
Tru-Stone Surface Plate
48x72x10 Grade A Inspection
Total: 1
Starrett Crystal Pink Surface Plate 36 x 48
36×48 Grade AA Laboratory
Total: 1
Starrett Surface Plate 24 x 24
24×24 Grade A Inspection
Total: 2
Starrett Surface Plates 18 x 24
18×24 Grade A Inspection
Total: 1
Support Equipment
Amada Automatic H250 Cutoff Saw
10×10 Capacity 16 Inch Max Programmable Stroke Dual Shuttle Vises Part Counter
Total: 1
Wellsaw Model 1018 Cutoff Saw
Wellsaw Model 1018 Cutoff Saw
Total: 1
Dake 16 inch Vertical Band Saw
Total: 1
Eisle 14 Inch Cold Saw with Digital Readout
Total: 1
Black Diamond precision drill grinder
Total: 1
Cress Micro Processor Controlled Dual Chamber Heat Treat and Tempering Furnace
Total: 1
Sunnon Toolroom Hone MBB1660
Total: 1
Hyster Electric Forklift
5000 lb. Capacity
Total: 1
Pexto Foot Shear
16 Gauge x 36 Inch Capacity
Total: 1
Ingersoll Rand 15HP Screw compressor, aftercooler and dryer
Total: 1
Ingersoll Rand 10 HP screw compressor, aftercooler, and dryer.
Total: 1
Raytech Vibrating Tumbler
Total: 1
Dayton Glass Bead Blaster
Total: 1
